Have a question? Give us a call: +8613911515082

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We emphasize progress and introduce new merchandise into the market each and every year for Ut Thickness Gauge Prices, Pipe Hardness Test, Ultrasonic Piezo Transducer, We attend seriously to produce and behave with integrity, and by the favor of customers at home and abroad in the xxx industry.
China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck Detail:

TMTECK TC-200 Crack detector

IMG_3853

Crack detection has never been easier or more affordable!

 

Detects and measures surface cracks in steel – even under thick protective coatings!

Inspect:

Bridges and buildings and other structures

Amusement park rides

Mining and earth moving equipment

Cranes and other lifting equipment

Ships, tanks, military hardware

Pipelines, pressure vessels and oil field equipment

Signal Light Masts, etc.

Features:

Detects cracks under thick coatings

Simple to use

Indicates crack severity (depth)

Accurately find the crack tip

Minimal training required

No need to remove paint and other coatings.

No need to remove oil and grease

Economical

Fast – scan a foot of weld in 10 seconds!

Minimize the use of dye penetrant and magnetic particle inspection (use only to prove-up test results).

Less expensive than eddy current and ACFM instruments

Light weight – 0.6 lb. (300gr.)

No consumables

No mess

14 hour battery operation

Water resistant case (IP-65)

SET-UP:

Place a plastic shim of similar thickness to your coating on the test block. Place the probe over a defect free area and press the “balance” button

Rotate probe so that finger grip is parallel to the notch

Scan the probe over the appropriate notch in the test block and adjust the sensitivity buttons as required to achieve the required sensitivity.

OPERATION:

plate and pipe:

Scan the area of interest in a Zigzag pattern, repeat at 90 degrees.

welds:

HAZ

Place the probe over the Heat Affected Zone immediately adjacent to the weld and scan the length of the weld. Move the probe 1/8” (3mm) and scan the length of the weld, repeat this process until ½” (12.5mm) is covered on either side of the weld. Note: the probe finger grip should be parallel with the weld.

WELD CROWN

Scan the weld crown in a Zigzag pattern. On bare, rough welds, it is helpful to place a plastic sheet or tape over the weld.

THEORY OF OPERATION:

The probe contains a transmitter and receiver. The transmitter creates a stable AC

magnetic field in the test material that is disrupted by a crack. The receiver in the

probe is a proprietary semi-conductor magneto-sensitive device that detects and

measures the resultant magnetic flux leakage that indicates the presence and severity of a crack.


Product detail pictures:

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures

China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck detail pictures


Related Product Guide:

We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for China wholesale Ultrasonic Flaw Detector - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck , The product will supply to all over the world, such as: France, Poland, Thailand, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
  • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Gary from Turin - 2017.11.20 15:58
    Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
    5 Stars By Janet from Amsterdam - 2017.11.29 11:09
    Write your message here and send it to us