Good quality Metallographic Sample Grinding Polishing Machine - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck
Good quality Metallographic Sample Grinding Polishing Machine - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck Detail:
Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100
Model TMSQ-60 Metallographic Specimen Cutting Machine can be used to cut the general metallographic or petrographic specimen materials. To enable the machine to cut the best specimen in a safe state, this kind of machine is equipped with fully enclosed structure and fast clamping mechanism, and there is also a cooling tank for coolant recycling, in order to clear up the heat produced during cutting and avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the best instrument for specimen preparing and cutting.
Technical specifications:
1. Max. cutting section: Φ60mm
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×2×32mm
4. Electric motor: 2.2KW 380V, 50Hz
5. Dimensions : 730×700×540mm
Model SQ-80 Metallographic Specimen Cutting Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or petrographic structure. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
Technical specifications:
1. Power: Three-phase four-wire (380V 50Hz)
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×1.2×32mm
4. Max. cutting diameter: 80mm
5. Electric motor: Y2-100l-2 3.0KW
Model SQ-100 Metallographic Specimen Cutting Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or petrographic structure. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
Technical specifications:
1. Power: Three-phase four-wire (380V 50Hz)
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×1.2×32mm
4. Max. cutting diameter: 100mm
5. Electric motor: Y2-100l-2 3.0KW
Product detail pictures:
Related Product Guide:
Our growth depends around the superior machines, exceptional talents and consistently strengthened technology forces for Good quality Metallographic Sample Grinding Polishing Machine - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck , The product will supply to all over the world, such as: Sao Paulo, Myanmar, Peru, Further, we are supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to offer our clients an effective range of products.
By Bernice from Namibia - 2017.08.18 11:04
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Betsy from Barbados - 2018.06.05 13:10