OEM Factory for Pipe Calibration Blocks - Phased Array Assessment Block Type B – TMTeck

Short Description:

Product Detail

Product Tags

Feedback (2)

Along with the "Client-Oriented" enterprise philosophy, a rigorous high-quality control process, superior production products along with a robust R&D group, we constantly deliver premium quality products, exceptional solutions and aggressive costs for Portable Hardness Tester, Best Paint Thickness Gauge, Portable Surface Roughness Tester, We fully welcome shoppers from all around the world to ascertain stable and mutually effective enterprise interactions, to have a dazzling long run jointly.

OEM Factory for Pipe Calibration Blocks - Phased Array Assessment Block Type B – TMTeck Detail:

Description
The Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC curves, and evaluate linear/angular resolution, focusing ability and beam steering capability. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities. This block is also referred to as a “Type B” block.

Inch
Dimensions: 1″ thick x 4″ wide x 6″ long
material: 1018 Steel, stainless steel , aluminum
plastic carrying case
In accordance with ASTM E2491
Block features:
Four (4) angled holes (30°, 45°, 60°, 75°) at 1/16″ 0.0625) diameter
Array of 18 holes on 1″ radius at 0.040″ diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 2″ radius at 5/64″ 0.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at 0.040″ diameter with 0.120″ of separation between holes.
Angled row of 12 holes at 1/16″ 0.0625) diameter with 0.200″ of separation between holes.

Metric
Dimensions: 150mm x 100mm x 25mm
material: 1018 Steel, stainless steel , aluminum
plastic carrying case
In accordance with ASTM E2491
Block features:
Four (4) angled holes (30°, 45°, 60°, 75°) at 1.5mm diameter
Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 50mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between holes.
Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes.

Package including
1 calibration block
1 certificate
1 block case

Product detail pictures:

Related Product Guide:

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for OEM Factory for Pipe Calibration Blocks - Phased Array Assessment Block Type B – TMTeck , The product will supply to all over the world, such as: Armenia, Iceland, Guatemala, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Block With Wedges