Professional China Ultrasonic Flaw Detector Machine - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck
Professional China Ultrasonic Flaw Detector Machine - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck Detail:
TMTECK TC-200 Crack detector
Crack detection has never been easier or more affordable!
Detects and measures surface cracks in steel – even under thick protective coatings!
Inspect:
Bridges and buildings and other structures
Amusement park rides
Mining and earth moving equipment
Cranes and other lifting equipment
Ships, tanks, military hardware
Pipelines, pressure vessels and oil field equipment
Signal Light Masts, etc.
Features:
Detects cracks under thick coatings
Simple to use
Indicates crack severity (depth)
Accurately find the crack tip
Minimal training required
No need to remove paint and other coatings.
No need to remove oil and grease
Economical
Fast – scan a foot of weld in 10 seconds!
Minimize the use of dye penetrant and magnetic particle inspection (use only to prove-up test results).
Less expensive than eddy current and ACFM instruments
Light weight – 0.6 lb. (300gr.)
No consumables
No mess
14 hour battery operation
Water resistant case (IP-65)
SET-UP:
Place a plastic shim of similar thickness to your coating on the test block. Place the probe over a defect free area and press the “balance” button
Rotate probe so that finger grip is parallel to the notch
Scan the probe over the appropriate notch in the test block and adjust the sensitivity buttons as required to achieve the required sensitivity.
OPERATION:
plate and pipe:
Scan the area of interest in a Zigzag pattern, repeat at 90 degrees.
welds:
HAZ
Place the probe over the Heat Affected Zone immediately adjacent to the weld and scan the length of the weld. Move the probe 1/8” (3mm) and scan the length of the weld, repeat this process until ½” (12.5mm) is covered on either side of the weld. Note: the probe finger grip should be parallel with the weld.
WELD CROWN
Scan the weld crown in a Zigzag pattern. On bare, rough welds, it is helpful to place a plastic sheet or tape over the weld.
THEORY OF OPERATION:
The probe contains a transmitter and receiver. The transmitter creates a stable AC
magnetic field in the test material that is disrupted by a crack. The receiver in the
probe is a proprietary semi-conductor magneto-sensitive device that detects and
measures the resultant magnetic flux leakage that indicates the presence and severity of a crack.
Product detail pictures:
Related Product Guide:
Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for Professional China Ultrasonic Flaw Detector Machine - TMTECK TC-200 Crack detector for Detecting cracks under thick coatings – TMTeck , The product will supply to all over the world, such as: Palestine, Bandung, Ecuador, Our main objectives are to provide our customers worldwide with good quality, competitive price, satisfied delivery and excellent services. Customer satisfaction is our main goal. We welcome you to visit our showroom and office. We are looking forward to establish business relation with you.
By Queena from Somalia - 2017.03.07 13:42
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Matthew Tobias from Latvia - 2018.09.21 11:01