TMTeck Magnetic Type Rockwell, Brinell & Rockwell Hardness Tester TMBR-500

Introduction

The world No. 1 Rockwell or Brinell & Rockwell hardness tester, capable of testing the hardness of metals by touching only one side of the test piece, designed according to the principle of both Rockwell and Brinell hardness testing.

The test head of the Rockwell or Brinell & Rockwell hardness tester is adsorbed on the surface of iron and steel by magnetic force, without giving support to the test piece.

The testing accuracy complies with ISO6508/ 6506 no lower than that of the relevant bench type hardness tester.

Suitable for testing the large-size work pieces which are assembled, unable to cut and inconvenient to move such as the large-size mold, steel plate, steel tube, steel structure, boiler, pressure vessel and metallic pipeline etc.

Fast and easy testing without sampling; any large work pieces can be tested with only one flat or curved surface available for holding the instrument.

The testing results meet the requirements of the product standards or drawings of most workpieces without conversion.

Can take the place of Leeb hardness tester of low accuracy in most cases.

Model TMBR-500 with the digital screen,can easy test and get test result.

Main Technical Parameters:

Initial Test Force: 10kg

Rockwell Test Force: 60kg, 100kg, 150kg

Brinell Test Force: 62.5kg, 125kg, 187.5kg

Force Applying Method: by screw

Indenter: 120°diamond cone, Ф1.588mm,  Ф2.5mm,  Ф5mm carbide balls

Maximum Magnetic Force: >350kg

Test Range: Rockwell hardness HRC, HRB, HRA etc. 15 scales

Brinell hardness HB 30, HB 10, HB 5, HB 2.5 etc. 4 testing conditions

Resolution: Rockwell hardness 0.5HR, Brinell hardness indentation diameter 0.01mm

Accuracy: in accordance with ISO6506/6508

Applications: steel, forged steel, cast iron etc

Model Selection: